Little Giant VCMA-20 Series 80 GPH Automatic Condensate Removal Pump with Safety Switch (115v)
$70.02
RectorSeal - Condensate Removal Tank Pump - RTP24-230
$58.20
Diversitech CP-22 Condensate Pump with 22′ Lift (230v) with Tubing
$59.99
The CP-22 is suitable for use with condensate from HVAC systems including high efficiePncy furnaces and humidifiers which produce acidic condensate, Suitable for use with condensate from HVAC/R applications.
Product Documents
Product Bulletin
Technical Data Sheet
Installation instructions
Flyer
Out of stock
Condensate Pump
The CP-22 condensate pump is suitable for use with condensate from HVAC systems including high efficiency furnaces and humidifiers which produce acidic condensate, Suitable for use with condensate from HVAC/R applications. 22ft of lift compared to the typical 20ft. Features include vibration dampening feet and motor mounts, metal hang tabs, four inlet holes, a clear indicator display, a float switch and check valve. Integrating the CP-22 into your system is easy. 1/4in. quick connect terminals provide easy connection to the built in overflow switch. Two Safety Switch terminals are provided to provide system shut-down as needed. The new CP-22LP comes packed with all the same great features found in the CP-22, but now in a low profile package. This pump is only 4 3/8in. tall so it’s a good fit for those instances where space is at a premium. The shorter reservoir holds 1/3 gallon. Suitable for use with condensate up to 160 degree F.
Design
Designed to run intermittently, condensate pumps include a collection tank where condensate (captured condensed liquid) can accumulate. When the liquid in the tank reaches a designated level a float switch activates the pump. The condensate is then pumped out of the tank until the level of liquid leaves room for more condensate collection. Some pumps contain a two-stage switch. As liquid rises to the designated first stage, the pump is activated. If the liquid continues to rise, because the pump has failed or discharge is blocked, a second stage is engaged where the pump may be shut off or an alarm triggered. The system is fully automatic.
- Continuous duty 140F.
- Maximum inlet temperature 160F
- Not suitable for contact with steam or gases that exceed 160F
- 96 GPH
- Vibration Isolation
- Indicator Lights
- Rubber Feet
- Four Inlet Holes
- Removable Check Valve
- Overflow Safety Switch
- Metal Hang Tabs
- Tubing Included
Additional information
| Weight | 108.8 lbs |
|---|---|
| Dimensions | 12.25 × 7.75 × 9.63 in |
Reviews
There are no reviews yet.